33
Lever Blade Installation
L e v e r B l a d e I n s t a l l a t i o n
Insert the Reach Adjust Screw pin into the SwingLink cam hole.
Line up the pivot holes of the lever blade with the pivot holes in the
lever body.
Make sure your lever bias spring is seated properly in the lever. The
outboard end of the spring must press against the lever blade, while
the inboard end of the spring must press against the lever body. If the
spring is not seated properly, you will not be able to adjust the reach of
the lever blade.
G2 RSC:
Hold the spring and main pivot clip in place while installing
the lever blade.
1
2
