Model SR2555 Stand-On Scale
Rev 991222
))
))
))
..
0.0
W
SECTION II
S
S
2.0
BUTTON FUNCTIONS and BASIC OPERATION
2.0.1
LANGUAGE SELECT
The language button allows you to select one of the following languages to display weight data
and system messages –
ENGLISH FRANÇAIS ESPAÑOL DEUTSCH ITALIANO DANSK NEDERLANDS
Procedure for Weighing Standing Patients
2.0.2
ZERO –
Press the
“0”
button to set the system tare to ZERO. The displayed message will indicate
“PLEASE WAIT – HANDS OFF” / “ZEROING SCALE”
. Make sure that nothing is in contact with the scale
system during this process. In a few seconds the display will
indicate “WEIGHT = 0.0 POUNDS”
(or
KILOGRAMS).
The Patient may now step up onto the scale platform to view the weight data.
NOTE: It is recommended that you press “0” before each weighing to assure optimal accuracy.
2.0.3
WEIGH -
If the display shuts off before you are able to view the weight data, simply press the
“WEIGH”
button to wake the display and view the patient’s weight. The display will
indicate “CURRENT WEIGHT
= XXX.X POUNDS“
(or KILOGRAMS).
2.0.4
MEMORY/RECALL -
Pressing the
“MEMORY/RECALL”
button will freeze the displayed weight data and
store it away in memory. To recall the stored weight data, wait until the system has automatically shut
off then press the
“MEMORY/RECALL”
button. The display will indicate
“LAST WEIGHT = XXX.X
POUNDS”
(or KILOGRAMS).
Pressing the
“0.0”
button will clear the last stored weight from memory.
2.0.5
POUNDS / KILOGRAMS -
Weight data may be viewed in either POUNDS or KILOGRAMS. Pressing the
button allows you to switch between display modes quickly and easily.
Both modes will display patient weight with 0.1 units of resolution. ( 0.1 Lb. or 0.1 Kg. )
2.0.6
IMPORTANT –
Be sure not to touch the patient or the scale during the weighing process. By design,
the entire scale assembly is weight sensitive so that the patient may use the structure for support
should their condition dictate.
Page 4
LB
/
KG