Squareled Mr. Beam, Руководство пользователя

Страница: 9 / 12

Manual | „Mr Beam“
Noted: In order to avoid failures and interference signal transmission, we connect a resistance 120Ω (1/4W) at
the end of the DMX connecting as below:
The Conversion between 3 pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable
3-Pin XLR to 5-Pin XLR Conversation
Conductor 3-Pin XLR Female (Out) 5-Pin XLR Male (In)
Ground/Shield Pin 1 Pin 1
Data Compliment (– signal) Pin 2 Pin 2
Data True (+ signal) Pin 3 Pin 3
Not Used Do Not Use
Not Used Do Not Use
10. Connecting picture
Light connecting picture:
Termination reduces signal errors and avoids signal transmission problems and
interference. It is always advisable to connect a DMX terminal, (Resistance 120
Ohm 1/4 W) between Pin 2 (DMX –) and Pin 3 (DMX +) of the last fixture.