Squareled Mr. Beam, Руководство пользователя

Страница: 8 / 12

Manual | „Mr Beam“
8. Operating Control Instruction
Master
The master should always working as a master as long as it is not set in a DMX mode whatever other modes it
is. And it send out the signal so that the slave synchronous with it. To avoid the host signal and DMX512 signals
interfere with each other, should cut off the DMX512 signals. The signal lines are longer than 60 meters (20
lamps), should increase a signal amplifier.
Slave
The Slave must be set in DMX mode and the address code should be A001, to assure receive the master’s
signals correctly. Only one light can be set as a Master and others are slaves.
9. XLR cable connecting
XLR cable
The standard connection way of the XLR is: one end connects to the male plug, and the other connects to the
female. As below: pin 1: ground, pin 2: negative signal, pin 3: positive signal
XLR Pin Configuration
Pin 1: Ground
Pin 2: Date Compliment (negative)
Pin 3: Data True (positive)
COMMON
DMX512 OUT
3 PIN XLR DMX512 IN
3 PIN XLR
DMX +
DMX –