background image

Manual | „Mr Beam“

Operating instruction:

 

MENU (UP/DOWN) + ENTER + UP/DOWN + ENTER

Exp: Select the DMX mode, Here are the operation details:

Press the MENU, go back to the initial setting
Press UP/DOWN, display “Addr”
Press ENTER to change the content, the display will glinting at this moment 
Press UP/DOWN to change the address code to select A001
Press ENTER to select and store the current menu options. DMX mode will be stored automatically  

  and the screen will stop glinting.
Exp: Select DMX Channels optional mode, the operation is as below:

Press MENU, go back to the initial setting
Press UP/DOWN, display ”CHnd”
Press ENTER to change the content, the display will glinting at this moment 
Press UP/DOWN to select the DMX channels that you need 5CH, 6CH, 9CH and so on
Press ENTER select and store the current menu options. DMX mode will be stored automatically  

  and the screen will stop glinting
Exp: Close the display, the operation is as below:

Press MENU, go back to the initial setting
Press UP/DOWN, display “LED”
Press ENTER to change the content, the display will glinting at this moment 
Press UP/DOWN to select “OFF”
Press ENTER to confirm, the select the working mode that you need. When stop pressing, the display will 

  shut after a while. When the display is closed, press any button to activate the display. If setting the led  
  to “off”, when stop pressing, the display will shut after a while

Details of program built inside (Pr- -)

Press MENU, go back to the initial setting

Press UP/DOWN until Pr-- 
Press ENTER to choose, the display will glinting at this moment
Press UP/DOWN to change the address code to select pr00
Press ENTER to select and store the current menu options. DMX mode will be stored  

  automatically and the screen will stop glinting

Pr00--- Pr62 R,G,B.W single color or multi-colors lighting
Pr63: Multi colors jumping
Pr63 can modify the content of SP--,modify the jumping speed.SP00 is the fastest, SP15 is the slowest

»
»
»
»
»

»
»
»
»
»

»
»
»
»
»

»
»
»
»

Содержание Mr. Beam













Отзывы: