SQIM 9305-9306-9307-9308 05-12-19 | SQ Professional Ltd © 2020 All rights reserved
Twist-N-Blitz Nutrient Extractor Instruction Manual
Use & CaRe
Take out the required length of cable and connect the appliance
to the mains supply
ASSEMBLY AND USE OF THE NUTRIENT
EXTRACTOR
1
Place the blending bottle
2
on a firm flat surface with the
open end facing up fill the bottle with ingredients below
the 600ml mark
image
a
2
fit the blade assembly
3
onto the blending bottle and
tighten firmly
.
image
b
3
Turn the blending bottle upside down so that the blade
assembly is at the bottom and align the arrow on the
blade assembly with the arrow on the rim of the motor
block
4
image
c
4
Twist the blending bottle
2
clock-wise until it locks, then
press the one-touch blend button
5
to start the blending
process
5
Hold the one-touch blend button
5
until the blending
process is finished Release the button to stop the appliance
6
When blending is finished, and the blades have stopped
rotating, twist the blending bottle
2
counter-clockwise
to remove it from the motor block
4
Unscrew the blade
assembly
3
, fit the spill-proof sport-style lid
1
on the
blending bottle and your healthy drink is ready to go
image
d
USEFUL TIPS
1
To achieve the best results when blending solid ingredients,
cut them into small pieces before putting them into the
blending bottle Do not exceed the MaX mark
2
ensure that there is always enough liquid, especially if
blending solid ingredients
3
In case the blades get stuck during blending process, stop
and unplug the appliance, and remove the bottle from the
motor block and give it a shake If the blades are still stuck,
use a spatula or similar utensil to remove the blockage
4
If blending warm liquids or ingredients always ensure that
they are cooled down before blending
CLEANING
MOTOR BLOCK
NEVER IMMERSE THE MOTOR BLOCK IN WATER.
Wipe the motor block
4
clean with a damp cloth and dry
immediately with a soft cloth to avoid scratches and water marks
on the surface
QUICK CLEANING
fill the blending bottle
2
half way with warm soapy water fit the
blade assembly
3
, and place onto the motor block
4
Press and
hold the blend button
5
for 10-20 seconds Detach the bottle
and the blade assembly and rinse them under running water then
dry with a soft cloth
BEFORE FIRST USE
ALL PARTS OF THE APPLIANCE ARE TO BE THOROUGHLY CLEANED BEFORE BEING USED FOR THE FIRST TIME (SEE SECTION ON CLEANING).
BE CAREFUL WHEN HANDLING THE BLADE ASSEMBLY. THE BLADES ARE VERY SHARP. NEVER ATTEMPT TO FIT THE BLADE ASSEMBLY ONTO
THE MOTOR BLOCK BY ITSELF. DO NOT OPERATE THE APPLIANCE FOR MORE THAN 60 SECONDS WITHOUT GIVING IT A REST PERIOD OF ONE
MINUTE.
A
C
B
6