12.
Place felt
washer (22)
over spinner
shaft.
13.
Insert agitator
wire (28) into
spinner shaft.
Note direction
of agitator wire.
14.
Tighten all bolts
and you are
ready to spread.
6
Final Assembly
Rate Gate Assembly
5
10.
Attach on/off
control cable [37]
to control bar with
2 bolts [31] &
2 nuts [29]. Put
end cap (30) on
lever control bar.
11.
Secure on/off
control cable to
tow bar with
cable clamp
(32), using
1 bolt (42) and
1 nut (25).
Note go to
page 7 for
complete
adjustment
instructions.
