S U R V E I L L A N C E S Y S T E M S b y E T H E R E A L
The functions described below must be done locally at the NVR.
©
COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
460 Walker St., Holly Hill, FL 32117 MetraHomeTheater.com
Step 2. Recording Setup
Let’s setup the recording of the NVR. In this section, Time = 24/7 and Motion = NVR
will only record when cameras see motion. (00:00 – 23:59 represents 24 hour re-
cording from midnight to 11:59:59pm) If you would like to have a mix of motion or
time scheduled recording, you can adjust the time for each schedule with up to 4
schedules.
1.
Right click
2.
(Left Click) on
System Setup
3.
(Left Click) on
Record setup
4.
(Left Click) on drop down box located to the right of
Weekday
5.
(Left Click) on the word ‘
Everyday
’ (If you would like your schedule to vary
from day to day, only select the days you want to change)
6.
(Left Click) “
Schedule 1
” Motion box or Time box.
7.
(Left Click) on ‘
ALL
’ Box (If you would like your schedule to vary from
day to day, only select the days you want to change)
8.
(Left Click) on ‘
Copy to
’ located at bottom left.
9.
Go to the bottom and (Left Click)
Apply
, then (Left Click) OK.