25
Settings:
-Network: Configure the receiver’s IP
address (advanced), view network
information, or reset your remote access
password.
1. Networking setting: IP Addressing
Options to select the Static IP and
Dynamic IP
CAUTION: This section is for advanced
users only. Please do not change any
settings unless advised to by our
support staff.
Note:
• Dynamic IP addressing is enabled by
default.
• A static IP address is not required for
remote access to the system.
• You may have to configure your router
settings if the DHCP server is enabled.
2. Information: Set up the Static IP
address and Dynamic IP on/off, display
the current network information (IP
State,IP Address, default gateway, MAC
address ,UID as pasted on the back of
monitor ,etc).
3. Reset password: Reset the remote
access password to ‘000000’
USING THE SYSTEM
1DVRDIG1503
