SPY JeepMeter, Руководство по эксплуатации

Страница: 8 / 20

8
p i c lt d .co m
bATTErY IN STrUcTIoNs
The SPY
®
Model JM operates on two 9 volt alkaline batteries. The
battery compartment is located on the back side of the unit.
STEP 1: Make sure the detector power switch is in the off position.
STEP 2:
The battery compartment is located on the back side of the
unit. Using the notch on the bottom of the battery compartment lift up
and pull out to slide the battery trays out.
STEP 3: Insert two new 9-volt batteries into the battery trays and
push the battery tray firmly back into the unit making sure it locks into
place.
If the battery discharges to a low level the JeepMeter display will begin
to flicker or will not come on, at this point the JeepMeter is not properly
measuring voltage and the batteries should be changed to two new 9
volt batteries.
Low Battery