FAQ:
Q: Can’t start recording – LED flashes only once and the card is not full.
A: The card contains 255 records. For next recording you must delete at least last record from
the list or format the card.
Q: Card can’t be initialized, LED always flashes 5 times.
A: Card is not micro SDHC type or is not properly inserted or the power supply can’t give
sufficient current to initialize the card.
Q: The beginning time of recording is incorrect.
A: This time is always equivalent to the real time clock, which are synchronized from the
card. This problem should happen, when the batteries were removed or the card was removed
and clocks are resynchronized again with wrong time.
Q: Recorder was operating and the power source has been suddenly interrupted.
A: For this case the last record will be stored properly without any problems.
Q: The image file is missing on the card, or the card is unreadable in PC computer or the
image file was deleted.
A: In this case never try to recover the date by using any data recovery software and consult
this problem with your distributor of recorder. All the data should be recovered, but recorder
is using specific way to store the data and special procedure must be used for this case.