manualshive.com logo in svg

SPX FLOW Power Team PB10 Series, Перечень деталей и инструкция по эксплуатации

Поделиться
Скачать
SPX FLOW Power Team PB10 Series Скачать руководство пользователя страница 4

4

© SPX FLOW, Inc.

Form No. 1001044

Rev. 2    Jan. 25, 2019

The safety signal word designates the degree or level of hazard seriousness.

:  Indicates an imminently hazardous situation which, if not avoided, will result in death or 

serious injury.

WARNING

:  Indicates a potentially hazardous situation which, if not avoided, could result in death 

or serious injury.

:  Indicates a potentially hazardous situation which, if not avoided, may result in minor or 

moderate injury.

CAUTION:

  Used without the safety alert symbol indicates a potentially hazardous situation which, if 

not avoided, may result in property damage.

IMPORTANT:

  Important is used when action or lack of action can cause equipment failure, either  

immediate or over a long period of time.

SAFETY SYMBOLS AND DEFINITIONS

WARNING

  The following procedures must be performed by qualified, trained personnel who 

are familiar with assembling this equipment. 

•  Operators/installers must read and understand all safety precautions and operating 

instructions included with the pump. If the operator cannot read these instructions, 

operating instructions and safety precautions must be read and discussed in the operator’s/

installer’s native language.

•  These products are designed for general use in normal environments. These products are 

not designed for lifting and moving people, agri-food machinery, certain types of mobile 

machinery, or in special work environments such as: explosive, flammable, or corrosive. 

Only the user can decide the suitability of this product in these conditions or extreme 

environments. Power Team will supply information necessary to help make these decisions. 

Consult your nearest Power Team facility.

•  Safety glasses must be worn at all times by the operator and anyone within sight of the unit. 

Additional personal protection equipment may include: face shield, goggles, gloves, apron, 

hard hat, safety shoes, and hearing protection.

•  The owner of this tool must ensure that safety-related decals are installed, maintained, and 

replaced if they become hard to read.

•  Disconnect the battery from the pump and relieve pressure before opening any connections 

in the system.

•  The guide cannot cover every hazard or situation so always do the job with SAFETY FIRST.

SAFETY PRECAUTIONS

Содержание Power Team PB10 Series













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды