23
© SPX FLOW, Inc.
Form No. 1001044
Rev. 2 Jan. 25, 2019
2. Maintenance Cleaning
IMPORTANT
:
Never use a high pressure washer to clean hydraulic components!
A. Keep the pump’s outer surface as free from dirt as possible.
B. Seal all unused couplers with thread protectors.
C. Keep all hose connections free of dirt and grime.
D.
The breather-hole in the filler cap must be clean and unobstructed at all times.
E. Equipment connected to the pump must be kept clean.
F. Use
approved Power Team hydraulic fluid
in this pump. Change as recommended (every 300 hours).
Some conditions may require the use of different viscosity hydraulic fluids.
3. Draining And Cleaning The Bladder
IMPORTANT: Clean the area around the filler hole to prevent contamination of the hydraulic fluid.
A.
Remove the filler plug and drain hydraulic fluid completely.
B.
Fill bladder half full with clean hydraulic fluid. Flush bladder with clean fluid and drain.
IMPORTANT: Never use solvents to clean the bladder! Never disassemble the bladder from the pump!
C. Fill the bladder completely full with clean
approved Power Team hydraulic fluid.
Preventive Maintenance continued
WARNING
To help prevent personal injury, any repair work or troubleshooting must be done by
qualified personnel familiar with this equipment.
• Use the proper gauges and equipment when troubleshooting.
NOTE: For a detailed parts list or to locate a Power Team Authorized Hydraulic Service Center contact
your nearest Power Team facility.
WARNING
It is best to check for system leaks by using a hand pump and applying pressure to
the suspect area. Watch for leaking fluid and follow it back to its source.
Never
use
your hand or other body parts to check for a possible leak.
TROUBLESHOOTING GUIDE
