2
APV_RGMS4_ATEX_UK-1_122018.indd
UK
Modulating valve with supported producut diaphragm
APV DELTA RGMS4 - MFS + MFH ATEX
Instruction manual UK-1
APV
1. General Terms
This instruction manual applies for the APV DELTA RGMS4 aseptic
modulating valve in the dimensions DN25-100, 1"-4" for use in
specific ATEX applications (according to Directive 2014/34/EU).
The valve must only be assembled, disassembled and reassembled
by persons who have been trained in APV valves or by SPX FLOW
service team members. If necessary, contact your local SPX FLOW
representative.
This instruction manual must be read and observed by the
responsible operating and maintenance personnel.
We point out that we will not accept any liability for damage or
malfunctions resulting from the non-compliance with this instruction
manual.
Descriptions and data given herein are subject to technical changes.
1.1.
Symbols
This symbol draws your attention to important directions which have
to be observed with regard to the operation in explosive areas.
This technical safety symbol draws your attention to important
directions for operating safety. You will find it wherever the activities
described are bearing health hazards or risks for persons or
material assets.
1.2.
Responsibility for ATEX certification - scope of supply
SPX FLOW will be held responsible only for the valves supplied
and selected according to the operating conditions indicated by the
customer or end user and as stated in the order confirmation. If in
doubt, contact your local SPX FLOW partner.
All other assembled equipment and devices must have a separate
certification of at least the same or higher grade of protection as
the valve supplied by SPX FLOW, provided by the supplier(s) of
that equipment and devices. The complete unit must be certified
separately by the final assembling manufacturer and must have a
separate name plate supplied by the unit manufacturer.