manualshive.com logo in svg

SPX FLOW APV CU41-D4, Инструкция по эксплуатации, Страница: 5 / 60

Поделиться
Скачать
SPX FLOW APV CU41-D4 Скачать руководство пользователя страница 5

APV_CU4 AS-i_UK-5_072018.indd

UK

Control Unit

CU4 AS-interface

Instruction manual: UK - rev. 5

APV

5

2.  Safety Instructions

2.2. 

Intended Use

The CU4 control unit is only intended for use as

described in chapter 3.1. Use beyond that described in

chapter 3.1. is not according to the regulations and SPX FLOW 

shall not be held responsible for any damage resulting from this

non-observance.

The operator bears the full risk. Conditions for the proper and

safe operation of the control unit are the appropriate transport

and storing as well as the professional assembly. Intended

use also means the observance of all operating, service and

maintenance conditions.

2.3. 

General Regulations for Careful Handling

To ensure a faultless function of the unit and a long service life,

the information given in this instruction manual as well as the

operating conditions and permissible data specified in the data

sheets of the control unit for process valves must be strictly

adhered to.

 - The operator is committed to operating the control unit in faultless 

condition, only.

 - Observe the general technical rules while using and operating the 

unit.

 - Observe the relevant accident prevention regulations, the national 

rules of the user country as well as your company-internal operating 

and safety regulations during operation and maintenance of the unit.

 - Switch off the electric power supply before carrying out any work on 

the system!

 - Note that piping or valves that are under pressure must not be 

removed from a system!

 - Take suitable measures to prevent unintentional operation or 

impermissible impairment.

 - Following an interruption of the electrical or pneumatic supply, 

ensure a defined and controlled re-start of the process!

 - If these instructions are not observed, we will not accept any liability. 

Warranties on units, devices and accessories will expire.

Содержание APV CU41-D4





























































Отзывы:

Нет отзывов