SPX FLOW APV CU41-D4 Скачать руководство пользователя страница 18

Страница: 18 / 60

APV_CU4 AS-i_UK-5_072018.indd

Control Unit

CU4 AS-interface

Instruction manual: UK - rev. 5

APV

4. Mechanics and Pneumatics

4.6.

Solenoid valves

In the base of the control unit max. 3 solenoid valves are installed.

The 3/2-way solenoid valves are connected with the electronic

module by moulded cables and plug connectors.

Control:

effected by pwm-signal

Lever:

rotary switch at valve

4.7.

Throttling function

The operating speed of the valve actuator can be varied or reduced.

This may be necessary to slacken the actuation of the valve in order

to prevent pressure hammers in the piping installation. For this

purpose, the supply and exhaust air of the

first solenoid valve

can

be adjusted via the throttling screws respectively allocated in the

interface of the solenoid valve.

By turning the screws in anticlockwise direction, the inlet or outlet air

is throttled

4.8.

NOT element

Through the installation of the logic NOT element, the closing force

of the valve actuator can be increased by additional compressed air.

The NOT element conveys the compressed air via an external

reducing valve (max. 5 bar) to the spring side of the valve actuator.

The pressure reducing valve is fixed to 5 bar.

Note:

The air connection of the NOT element is equipped with an

integrated non-return valve.

The air hose must be slided into the air connection until it stops in

order to open the non-return valve.

The NOT element is also used for air/air actuators.

throttling screws

Содержание APV CU41-D4





























































Результаты поиска

Содержание APV CU41-D4

Отзывы:

SPX FLOW APV CU41-D4, Инструкция по эксплуатации, Страница: 18 / 60

Результаты поиска

Содержание APV CU41-D4

Отзывы: