6
Cleaning the Cooling Pad
1. After removing the filter, pull out cooling pad
2. Rinse under running water and place under sun to dry completely.
3. DO NOT use any detergents.
Cleaning the Water Tank
1. Remove dust filter and cooling pad.
2. Lift and remove bottom tray.
3. Clean the tray with lukewarm water and mild detergent.
4. Clean the inside of water tank with sponge or cleaning brush. Do not use
detergent as it may damage the water pump. If extremely dirty, clean with
Citric Acid.
Note: For thorough cleaning or if you have difficulty reaching the tank from the
tray opening, you may remove the back housing by first removing the 12 screws.
Storage
If you plan not to use the unit for a long period of time, drain the water tank and
wipe clean. Clean and dry the filter and cooling pad. Operate the unit in normal
fan mode for approximately 30~60 minutes on a sunny day. This will dry the
interior and prevent mold from growing. It is recommended to pack the unit in its
original box and store in a dry, cool place
F. CAUTIONS
1. Use normal supply of 120V / 60Hz. Plug into dedicated socket with minimum
rating current of 3A.
2. After filling with water, do not tilt unit and avoid moving unit
– which may
cause water to overflow the sides of the tank and leak. If unit needs to be
moved a little, push on the side gently.
3. Never turn the unit on its sides.
4. Do not place any objects on top of the Air Cooler. The air outlet must not be
obstructed.