5
6. MODE: Three types of computer-controlled airflow
Unit powers on to default - Normal mode (no indicator lights on).
Press once to operate in Natural mode (Natural indicator light on).
Press again to operate in Sleep mode (Sleep indicator light on).
Press again to return to Normal mode (no indicator lights on).
7. IONIZER: Oxygen Bar with Negative ion.
Press once to operate Ionizer feature.
Press again to turn off Ionizer feature.
NOTE
o
Place unit on a level surface. Please assure unit is not tilted during operation.
o
Check that the power supply is in compliance with the parameters of the unit.
o
Disconnect power before adding water to prevent electrical parts from damage.
E. CARE AND MAINTENANCE
Always power OFF and unplug the unit before cleaning and maintenance.
Clean the housing with a damp cloth. Never spray water directly onto the
housing or control panel or use harsh chemicals.
After long time operation, the Filter may become clogged with dust and dirt,
which will greatly affect the unit’s performance. Sometimes mold and mildew
may also occur, due to lack of water changes. It is recommended to clean the
filter and water curtain once every two weeks.
Emptying the Water Tank
1. Remove the rubber plug - located on the back of the unit, bottom-center
(above the base).
Note: Once the rubber plug is removed, water in the tank will begin to flow out. It
is recommended that you move the unit outdoors or have a container under the
spout before removing the plug.
Cleaning the Dust Filter
1. Disconnect the power supply.
2. Remove the screw (located on the top center of filter panel).
3. Pull out filter frame from top of back panel.
4. Wash under lukewarm water and mild detergent.
5. Make sure filter is completely dry before re-installing and operating unit.