4
D. SELECTION OF FUNCTIONS
1. ON/OFF: Turns unit ON or OFF
Press once to turn ON. Unit operates in default Low fan speed.
Press again to turn OFF.
2. OSC (FLOW): Oscillation of louvers.
Press once for louver oscillation. Green indicator light will illuminate.
Press again for fixed air direction.
3. SPEED: Selects fan speed.
Press to select desired fan speed: Low
– Medium – High, in turn. Control
panel will display the corresponding air speed.
4. TIMER: Sets timer-off in increment of 0.5 hours.
Timer can be set between 0.5 to 7.5 hours.
Press continuously until desired time is set, illuminated hours add up to
set time.
To remove timer and operate unit continuously, press button repeatedly
until all indicator lights are off.
5. COOL: For cool air / humidify function.
Press once to start the evaporative cooling function. COOL indicator light
will illuminate.
Press again to stop function and operate in regular fan mode.
Make sure water is added before turning on this function. Unit cycles the
water to blow cool, humidified air.
Adding Water or Ice
Open the top cover and add water into the box
indicated “WATER ONLY”. Never add water into
the ICE ONLY section.
Please check the water level indicator when filling.
DO NOT fill over the MAX line.
For added cooling, add ice cubes to the ICE ONLY
section. When adding ice, water level should not
be more than 2/3 full.
When water level is near the MIN line, please add
water immediately. Otherwise, cooling and
humidifying function will be affected.
If water is not added, you may hear a noise, this is the pump trying to
pump water
– please add water or turn off COOL mode.