![SPT SD-31E Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/spt/sd-31e/sd-31e_instruction-manual_1352179005.webp)
4
CONTROL PANEL
Control Buttons: whenever a button is pressed, the unit will make a beep sound to indicate that
it is changing modes.
CONT: Press to activate continuous dehumidifying mode.
FILTER: The check filter feature is a reminder to clean the air filter for more efficient
operation. The Filter Indicator Light will illuminate after 250 hours of operation. To reset
after cleaning the filter, press the Filter button to turn off indicator light.
FAN: Controls the fan speed. Press to select Turbo (high) or Normal fan speed. Set the
fan to Turbo for maximum moisture removal. When the humidity has reduced or when
quiet operation is preferred, set the fan speed to Normal.
POWER: Press to turn the dehumidifier on and off.
/
UP(+) / DOWN(-):
•
Set humidity level: Press to increase or decrease set humidity level. Range of
adjustment is from 35% to 85% RH, in 5% increments.
•
Set timer: Press to set timer, from 0 to 24 hours.
TIMER: Press to initiate auto-start and auto-stop feature, works with + and - buttons.
DISPLAY PANEL
•
Displays the set humidity level (from 35% to 85%) or auto-start/stop time (0-24) while
setting, then returns to display actual room humidity level (±5% accuracy), in a range of 30%
RH to 90%RH (relative humidity).
•
Displays error codes and protection codes:
o
AS – Humidity sensor error. Unplug and plug back in. If error repeats, call for service.
o
ES – Temperature sensor error. Unplug and plug back in. If error repeats, call for
service.
o
P2 – Bucket is full or bucket not properly seated. Empty bucket and replace in correct
position.
o
EC – Unit malfunction. Please make sure the environment temperature is suitable for
operation.
Clean filter
indicator light
High fan indicator
light
Low fan
indicator light
Auto defrost
indicator light
Bucket full
indicator light
Continuous drain
indicator light
Timer On/Off
indicator lights