SPRT SP-RMD17, Руководство пользователя

Страница: 8 / 17

6
2.2 Installation of the printer
Embedded printer in the installing hole of customer’s panel. open the printer paper cover,
clockwise to tighten the two screws to complete the installation of the printer . Print installation
shown in Figure 2-2.
Fig.2-2 Printer installation pic.
2.3 Paper Installation
2.3.1 Paper Loading
RMD17 adopts 57.5mm±0.5mm width thermal paper roll.
Steps of Loading Thermal Paper are as below:
Hold down the upper cover button on the left side, open the movable upper cover, draw a certain
length of the paper roll, put the paper end on the print head, close the upper cover and press it