12
2.3.4 Power Connection
POS88
Ⅴ
uses the external power supply adopter as 24V±10
％、
2A,
power socket is A-1009-3P model, as Fig. 2-10 shows:
Fig.2-8 Power Socket
The pin assignment is as below:
Pin No.
Signal
1
+24VDC
2
Ground
3
NC
2.4 Buttons and Indicators
There is one button and three indicators on POS88
Ⅴ
printer.
【
FEED
】
is paper
feeding button, the function of its enabling or disabling the button on/off can be
set by print command, when the button is enabled, press
【
FEED
】
button,
then the paper presenting driver starts up and paper feed into the printer;
release
【
FEED
】
button, paper feeding stops. The green POWER light is the
power indicator, red ERROR light is status indicator, it is dark when the printer
works normally, while it flashes when reporting an abnormal emergency, as the
following form shows:
Error
Indicator and Buzzer
Status
Description
Paper ending
“ERROR” indicator flashes Paper is running out
Print head uplift Buzzer rings
Put down print head
Print head
overheat
Hurried buzzer ring
Recovers automatically
when the print head cools.
Auto cutter
Position Error
Buzzer rings and indicator
blinks
Impossible to recover,
check if there is paper jam.
When any error shown above occurs, pin “nFault” of parallel change to “0”
level, and send 1 bit wrong code through serial TXD by itself, it can also send
out the printer state by answer the ESC v command.
