6
Cash drawer
interface
Interface Socket
Power Socket
Fig.2-1 Printer Appearance
2.2 Paper Installation
2.2.1 Paper Loading
POS88
Ⅴ
adopts 79.5mm width thermal paper roll.
Steps of Loading Thermal Paper Are as below:
Hold down the upper cover button on the left side, open the movable
upper cover, draw a certain length of the paper roll, put the paper end on the
print head, close the upper cover and press it downwards lightly.
1.Pay attention to the direction of loading paper,make
the printing surface face to the print head.
2.Please don’t feed or draw the paper forwards or
backwards with hands.
3.Keep clean of the print head,avoid to influence the
printing quality.
2.2.2 Solution to Paper Jam
If cutter jam,turn off the power,and turn on again,the cutter will be back
to original position.If paper jam,open the paper strage cover,and take out the
paper.If the cutter can not be back to the original position,open the cover of
！
！
！
！
Caution!
