SPRT
３
Command
Description
HT
Horizontal Tab
LF
Print and Feed Line
CR
Carriage Return
ESC SP
Set Right Spacing of ASCII Characters
ESC
！
Set Character Print Mode
ESC
％
Select/Cancel User-defined Characters
ESC &
Define User-defined Characters
ESC *
Set Bit-map Graphics Print
ESC 2
Set Character Line Spacing to 1/6 Inch
ESC 3
Set Character Line Spacing to n/144 Inch
ESC-n
On/Off Underline Print
ESC p
Cash Drawer Control
ESC v
Transmit Status of printer
ESC u
Transmit Status of Equipment
ESC <
Restore Print Head Position
ESC@
Initialize Printer
ESC D
Set Horizontal Tab Value
ESC J n
Print and Feed Paper n/144 Inch
ESC K n
Print and Return Paper n/144 Inch
ESC U
Select/Cancel Single Directional Print
ESC c 3
Select Paper Tester
ESC c 4
Set Stopping Print When Paper End
ESC c 5
On/Off switch Button function
ESC d n
Print and Load paper n Character Lines
ESC e n
Print and Return Paper n Character Lines
ESC t
Select Character Set
FS!
Set Chinese Print Mode
FS w n
Select/Cancel Chinese Quadruple Mode Print
FS &
Select Chinese Print Mode
FS.
Cancel Chinese Print Mode
FS2 c1 c2 d1…dk
User-defined Chinese Characters
FS? c1 c2
Cancel User-defined Chinese Characters
FS S n1 n2
Set Chinese Character Left and Right Spacing
GS (F
Set Black Mark Localization Offset
GS FF
Send Black Mark Paper to The Initial Print
Position
GS V m n
Select Paper Cutting Method and Cut Paper,
Present Paper
GS r n
Transmit Status
