SPRT
９
Recommend using the power supply that offered by the printer producer,
you can plug the power cable into the printer’s power socket, if use other
power supply, it should meet the specified voltage and power demands,
and connection should be correct, otherwise it can't guarantee the printer
works normally, even may damage the printer.
2.2.3 Cash Drawer Interface
POS76
adopts the RJ
Ⅱ
-11, 6-pin socket,
as Fig.2-7 shows:
Fig.2-7 Cash Drawer Interface
The pin assignment of the cash drawer interface is defined as follows:
2.2.4 Power Supply Connection
POS76
uses the external power supply as 24VDC±10
Ⅱ
％
, 2A, power
socket is A-1009-3P model, as Fig. 2-8 shows:
Fig.2-8 Power Socket
The pin assignment of the power supply connection is defined as follows:
2.3Buttons and Indicators
Offer LF paper feed button and power indicator(green), paper out
indicator(red),error indicator(red).
1. Self-test mode
：
hold down the <LF> paper feed button, turn on the
power, then self-test begins automatically.
2.
LED indicator specifications: while green indicator is on, this means the
power is connected, the paper end indicator is on indicates paper is end.
Pin No.
Signal
Direction
1
Chassis Ground
---
2
Cash Drawer Driver Signal
Out
3
Cash Drawer On/Off Status
In
4
+24VDC
Out
5
N.C.
---
6
Cash Drawer On/Off Signal Ground
---
Pin No.
Definition
1
+24VDC
2
GND
3
N.C.
