Sprintus CRAFTIX L, Оригинальное руководство пользователя

Страница: 13 / 144

I 13
1. Hose diameter selector switch (M vacuum cleaner only)
2. Cleaning function On / Off (incl.) Control light
3. Warning light and horn air velocity <20m/s (M vacuum
cleaner only)
4. Device OFF
5. Standard mode
6. Automatic mode with tool connected
7. Power socket (max. 2200W*)
21
27
32 35
42
Clean Filter
On/Off
Low Airflow
OFF
AUTO
ON
Clean Filter
On/Off
Low Airflow
Ø






6. OPERATION
6.1 Before each start-up
Before each start-up, make sure that the vacuum cleaner,
power cord, vacuum hose and accessories are not damaged.
It must also be ensured that the filter cartridge is inserted and
not damaged.
m
Make sure that plugged-in power tools are not switched on.
The socket on the vacuum cleaner is live when the mains
plug is plugged in, regardless of the switch position.
6.2 Adjusting the hose diameter (M vacuum cleaner only)
To ensure that the warning device (3) functions as prescribed,
the hose diameter used must always be set on the rotary
switch (1).
6.3 Permanent filter cleaning
The vacuum cleaner is equipped with electromagnetic valves
that clean the filter cartridge by air back flushing. Each cleaning
cycle cleans the two chambers of the filter cartridge 3 times
each. Cleaning takes place automatically every 30 seconds
after the last cleaning cycle.
If continuous cleaning is not necessary due to a low level of dust,
you can switch it off by deactivating the cleaning function (2).
Cleaning is active when the indicator light (2) on the control
panel lights up.
When working overhead with for example long-neck grinders,
make sure that the vacuuming is briefly reduced by the vacu -
um cleaner during the cleaning interval. This can cause the
tool to fall off the ceiling. Cleaning can be switched off for small
amounts of dust.
6.4 Insert fleece filter bag
1. Unlock the locking tabs and remove the motor head
2. Attach the fleece filter bag.
3. Put on the motor head and lock it with the locking tabs.
6.5 Insert disposal bag
1. Unlock the locking tabs and remove the motor head
2. Attach the disposal bag and put it over the edge of the con-
tainer. Note that the holes provided above the flange must be
placed over the electrodes of the water cut-off.
3. Spread the disposal bag against the inside of the container
in order to lose as little volume as possible.
4. Put on the motor head and lock it with the locking tabs.
6.6 Switching on the vacuum cleaner
The device allows 2 operating modes.
- Standard mode (5): Vacuum cleaner switches on immediately
5. DISPLAY AND OPERATING ELEMENTS

(EU) 20 - 2200 W
(CH) 20 - 1100 W
(GB) 20 - 1800 W
(AU) 20 - 1200 W
*