Sprint Airave, Руководство пользователя

Страница: 38 / 56

32 Section 3B: Troubleshooting
䢇
My System LED is red.
䡲
A red System LED indicates a system error was
detected and is symptomatic of a communication
problem with the Sprint network.
䡲
Before contacting your Sprint Customer Service
Center, check the following:
⽧
Is your WAN LED illuminating blue? If it is not,
then there may be a communication problem
between your base station and the router.
⽧
Is the GPS LED illuminating blue? If it is not, the
base station might not be properly receiving a
GPS signal. Inability to receive a GPS signal can
result in the base station failing to validate your
account information and network timing, which
then prevents usage and reroutes you back to the
nearest cell tower. If this is the problem, install
the external GPS antenna (page 26).
䢇
The AIRAVE base station seems to be getting too hot.
䡲
Make sure there is nothing blocking the heat vents
located along the side of the base station.
䡲
It is recommended that the AIRAVE be located in a
well-ventilated open area at least 12 inches from
any surrounding hard surfaces. It is not
recommended that the base station be installed in a
cabinet or other enclosed location.