Sprint Airave, Руководство пользователя

Страница: 32 / 56

26 Section 3A: Antenna Installation
Installing the External GPS Antenna
In very rare cases, you may find that because of its current
location, the base station’s internal GPS antenna may not be
able to properly receive and maintain an active GPS signal. If
the GPS signal is not detected, as indicated by the LED,
connect the included external GPS antenna.
Without a valid GPS signal, the base station cannot function
properly, and calls will be redirected to the nearest cell tower.
Connecting the GPS Antenna
When positioning the GPS antenna, ensure that it is:
䢇
Installed in a horizontal position.
䢇
Adjacent to a window and in an open area. This ensures a
clear reception of the GPS signal.
Follow these steps to connect the GPS antenna to the AIRAVE
base station:
1.
Turn off the base station.
2.
Identify the GPS port located at the rear of the base
station.
3.
Carefully lift the protective cover up to expose the GPS
mini-coax connector.
WARNING Use only the included Sprint-approved GPS antenna.
WARNING Do not use duct tape to secure the GPS antenna to its
new location.
Note: GPS signal strength can be greatly reduced in passing
through walls or other hard surfaces.