Sprint Electric JL/X Series Скачать руководство пользователя страница 37

Страница: 37 / 68

Mapping FIELDBUS parameters

The PL/X parameters require mapping to the host PC software.

5.1 Using drive.web savvy to map parameters

The PL/X series of DC Drives operate with several ethernet-based distributed control systems

(DCS), for example,

drive.web savvy

https://driveweb.com/get-savvy/

Implement

savvy

economically by using off-the-shelf ethernet hubs and connection

cables. Multiple drives can be interconnected to allow the system to be ethernet

enabled. Parameter connections are made virtually within all the units in a system.
Complete diagnostic information is available over RS232 or ethernet (with additional

hardware) when using a distributed control system (DCS) graphical software tool.

Use

drive.web savvy

to select parameters for transmitting to or receiving from the host

drive using, for example, the PROFIBUS protocol. You may fit the PL/X with other Anybus

CompactCom modules having different protocols.
Launch

savvy

, the

drive.web

tool for configuring devices and systems:

To select a phantom device

Double-click the PL/X "speedy-sp" phantom device for the Sprint-Electric PL/X on

the opening screen.

Select "Fieldbus" from the bottom of the screen's left-hand menu to display the

Fieldbus screen.

To select a connected device:

Display the "Directory" drop-down menu.

For example, select "Discover Device by IP Address". Enter IP address or hostname

and select "OK".

Double-click the new device added to the screen to display the "Engineering Info"

screen.

4. Select "Fieldbus" from the bottom of the screen to display the Fieldbus screen.

5.1.1 RS232 to USB converter

Your PC might not have an RS232 COM port. Instead, it will have a USB port. In this case,

fit a USB - RS232 converter (e.g. a single in-line converter type USB to serial male D9, or

multi-port type, for example, Belkin F5U120uPC). It will have the required driver utility

software. Install this on the computer first.

NOTE

: When using a USB - RS232 converter, plug it into the PC before powering up to

initialise it correctly.

After installing the driver software:

Right-click on the ‘My Computer’ icon and select Properties / Device Manager /

Ports to find the port allocated to the converter (COM1, COM2, COM3, or COM4).

Always use the nominated USB port allocation when setting up

savvy

Содержание JL/X Series





































































Результаты поиска

Содержание JL/X Series

Отзывы:

Sprint Electric JL/X Series, Руководство пользователя, Страница: 37 / 68

Результаты поиска

Содержание JL/X Series

Отзывы: