SpringCard FunkyGate-IP PC/SC, Быстрый старт

Страница: 5 / 12

5/12
EN
INSTALLATION INSTRUCTIONS
Introduction
Thank you for buying this SpringCard FunkyGate
Reader for your access control system. SpringCard
FunkyGate is a wall-mount reader. In order to install
it easily and correctly please follow the instructions
contained in this guide.
Product listing
This Installation Instruction guide targets the
following products :
Order # Product
SC16092 FunkyGate-IP PC/SC : new generation
wall-mount RFID/NFC/contactless card
Reader, with Ethernet interface (10 or
100 Mbit/s)
Precautions for installation & use
The SpringCard FunkyGate IP PC/SC Coupler
communicates with contactless cards, tags or any
other objects by the mean of RFID/NFC technology in
13.56MHz range. RFID/NFC works thanks to short
distance radio waves that propagates on a straight-
line (magnetic field).
These radio waves can't travel through metal. The
coupler’s operations may also be disturbed because
of other active devices in the nearby. Please respect
the following rules when installing your SpringCard
FunkyGate IP PC/SC Coupler.

The antenna shall not be installed in the
vicinity of any other RFID or NFC reader,
even from another manufacturer or
technology. The distance between two
readers shall be at least 30cm,

It is highly disadvised to place any metallic
or conductive area in front of the antenna
because it could distort the operation of
your antenna,

Keep away from any electronic equipment
that is likely to disturb the communication
at 13.56MHz,
Do not install your SpringCard FunkyGate Reader:

In the vicinity of another access control reader,
even from another brand or another technology. The
distance between two readers in the 13.56MHz range
shall be 30cm or more ;

On a metal plate, or near any kind of metal area
(aluminium door or window frame, thermal
insulation screen etc). There must be at least 8cm
between the Reader's back and any metal plate, and
there must be at least 12cm between the Reader's
sides and any object containing metal in the nearby ;

Near another electronic equipment, because the
waves it emits for operation, or even its internal
shielding, may alter the performances of your
SpringCard FunkyGate Reader.
Wiring, configuration and test
Once your SpringCard FunkyGate Reader is installed,
the next step is to connect it to your access control
system, and to load the correct configuration
depending on:

The kind of cards/tags you'll be using ;

The output format your controllers are waiting
for.
The rest of the document is a configuration tutorial
for the first use of your reader.
Contacting Support
Thank you for using the online form at address www.springcard.com/support for any question or technical
support request.
PMU18296-AA