Spraying Systems Co AutoJet AccuCoat MV10, Руководство пользователя

Страница: 3 / 18

3
SECTION 1
PREFACE
1.1 IMPORTANT
The AccuCoat
®
VC10 Heated System and all components are produced, tested and checked at the factory. The system
can be dangerous if used incorrectly. Read this manual carefully and read any safety instructions.
Operators must always follow the general safety instructions in the working area and aim to prevent accidents.
The manufacturer reserves the right to make changes in standard construction without prior notification.
Images and diagrams in this manual may not be exact representations of your system configuration.
1.2 HOW TO USE THIS MANUAL
This manual is intended to be a source of information for the operators and technicians who may be installing, inter-
acting with, or servicing/maintaining Spraying Systems Co.
®
systems and components.
This manual contains important safety warnings, installation instructions, operating instructions, troubleshooting, and
maintenance information.
ICONS
WARNING: The user can be seriously injured, damage their health, and/or damage the system.
CAUTION: Product, process, or environment can be damaged or be in danger if the instructions are
not followed correctly.
ATTENTION: Supplementary information for the user draws attention to possible problems.
SECTION 2
SAFETY
2.1 GENERAL SAFETY INFORMATION
READ AND FOLLOW INSTRUCTIONS
All safety related and operating instructions should be read before the system is operated. Follow all operating in-
structions.
SERVICING
Do not attempt to service this system unless you have been trained or authorized to conduct repairs. Only authorized
and qualified service personnel should attempt to service this system. Service by unauthorized personnel will void any
warranties.
WARNING: Before performing any maintenance, make sure all components are completely cool,
electrical power is off, and any air/liquid pressure is bled from the system
.
REPLACEMENT PARTS
This system has been designed with components that work together to provide the best system performance. When
replacement parts are required, only Spraying Systems Co.
®
recommended components should be used to maintain
proper system operation, electrical, and pneumatic safety. The use of any unauthorized replacement parts will void
any warranties.
UNINTENDED USE
Use of Spraying Systems Co.
®
equipment in ways other than those described in the documentation supplied with
the equipment may result in injury to persons or damage to property. Examples of unintended use of equipment
would be: