background image

 

Under copyright laws, this manual may not be reproduced in any form, in whole, or in part, without prior written permission from 
Spraying Systems Co®. This revision supersedes all previous revisions. Every effort has been made to ensure that the information in 
this manual is accurate at the time of printing. 

 

However, Spraying Systems Co. assumes no liability for errors or omissions and reserves the right to make changes without notice 
to any products described herein to improve reliability, function, or design. Other company and product names may be trade

-

marks of their respective companies. 

 

Warranty is one (1) year on non

-

wear parts from ship date. Wear items are covered for manufacturing defect only for a period of 

one (1) year. Wear items include, but may not be limited to, Liquid pump and Liquid regulator. Seller warrants that its products will 
conform to and perform in accordance with the products

’ 

specifications. 

 

Seller warrants that the products do not infringe upon any copyright, patent, or trademark. 

 

THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, 
THOSE CONCERNING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

 

North Avenue and Schmale Road, P.O. Box 7900, 

 

Wheaton, IL 60187

-

7901

 

Tel: 1.800.95.SPRAY

 

 

Intl. Tel: 1.630.665.5000

 

Fax: 1.888.95.SPRAY

 

 

Intl. Fax: 1.630.260.0842

 

www.spray.com

 

ML00MV10HTSYS  Rev. 3  4/2022                                                                                                     © Spraying Systems Co. 2022. 

 

Содержание AutoJet AccuCoat MV10



















Отзывы: