Blunote Buds TW™ Wireless
Bluetooth
® Ear Buds
3. There are also 4 blue LEDs on the case indicating the
charge level in the case. When all 4 are on, the case is
fully charged.
NOTES
1. Whether using both Buds or only a single one, the
pairing time is 120 seconds.
2. If the Buds don’t connect with a phone, tablet or other
Bluetooth
®
device they will power off after 5 minutes.
3. When using the Buds as a pair, if the Left/Main Bud
fails to connect with the Right Bud, you will need to
reset them by powering them off and back on.
4. If you’re using a single Bud connected to one phone/
tablet and you want to pair the other one to a different
device, make sure the buds are separated by 33' (10m)
before attempting to pair the second device.
5. If you want to pair the Buds with a new phone/tablet,
you need to first turn off both Buds, and delete the
profile in the Bluetooth® settings in your original
device. This is especially true if your devices are within
33’ (10M) of each other, the Bluetooth® range. You can
then follow the Power On instructions to pair with the
new device.
6. If you are using the buds as a set, only the Left/Main
Bud can be used to answer calls, or reject, cancel
and redial calls. You will hear the voice on a call only
through the Left Bud; the Right will be inactive.
7. To charge the Buds, place them in the case, slide the
switch to the left (ON), and plug the USB cable into a
power source.
8. Use the recharge battery case to charge your Buds
on the go. The blue LEDs on the case will indicate
how much charge is left (1 is the lowest level, 4 is fully
charged, no LED lights means recharge the case).
5
