Blunote Buds TW™ Wireless
Bluetooth
® Ear Buds
3
case will turn off.
2. Slide the switch to the right; the Buds power on.
Double press both Buds. The Left/Main Ear Bud will
connect to the Right Ear Bud. The LED on the Left Ear
Bud will flash alternately blue and red indicating a
successful connection.
3. Confirm that
Bluetooth
® on your phone/tablet is turned
on. Look for available
Bluetooth
® devices. You should
see
Blunote Buds TW
:
choose that one. Your phone/
tablet should now be connected to the Ear Buds.
Adjust Volume Use your phone or tablet’s volume
settings to adjust the volume
on your Buds.
Reconnecting Once you
have paired using any method,
your Buds will remember the
phone/tablet they were paired to last. To reconnect,
take both Buds out of the case or turn on both units (by
pressing the MFB for 3 seconds), and the Left/Main Bud
will re-pair automatically, and the Right/Second Bud will
connect to the Left automatically.
Using Only One Bud
1. Turn on the
Bluetooth
®
device you want to pair.
2. Power on the Bud by pressing and holding the MFB for
3 seconds until the blue LED flashes.
3. When the blue and red LEDs flash alternately, select
Blunote Buds TW
on your phone/tablet’s
Bluetooth
®
list.
4. The LEDs will stop flashing, indicating your device
is paired.
IMPORTANT: If you use just one bud, first in Single Ear
Mode, and then want to use both Buds at the same time
