Blunote Buds TW™ Wireless
Bluetooth
® Ear Buds
in Stereo Mode later, please note that you must pair the
LEFT/Main Bud first. If you pair the Right Bud first, the
Left one will not connect afterwards in Stereo Mode.
You will need to start over by deleting your old profile in
your phone/tablet, turn off/restart your device, and then
start the pairing process from the beginning.
Power Off
press the MFB on either Bud until you hear
the voice confirmation of “Power Off”.
Using Voice Commands
Press and hold the MFB on the Left/Main Bud for 3-4
seconds to enter voice command mode.
Left/Main and Right (Second) Buds
The Buds are marked R and L on their back sides.
1
–
While pairing, the Bud that alternately flashes both
the blue and red LEDs is the Left/Main.
2
–
If you double click the MFB, the Bud which can redial
the last number is the Left/Main.
3
–
If you make a phone call, you will only hear the voice
at the other end through the Left/Main Bud.
The Left channel is the Left/Main Bud, the Right channel
is the Right/Second Bud.
Note
If the Left Bud re-pairs with your device and is
playing music, but the Right Bud is not playing because
it’s not connected with the Left/Main Bud, turn off both
units and start the pairing and connecting process from
the beginning.
Charging
1. Put the Buds in the case and slide the switch to the
left. The red LEDs on the buds will light up, indicating
they’re charging.
2. When the red LED turns off, and the Blue LED turns
on, the charge is complete.
4
