Spotwave Wireless SpotCell 100, Руководство пользователя

Страница: 20 / 50

I
NSTALLATION
14
SpotCell 100, Release 1.0
4.
Plug the power adapter into a wall socket.
5.
Ensure the switch on the SCU is in the ‘Install’ position.
6.
To align the DDU, rotate the face of the unit from left to right
within the constraints allowed by the wall.
7. As you are rotating, you will notice that the LED on the back of the
DDU may light up green, red or amber; this is normal.
8.
Again, move the face of the unit right to left, this time stopping
your rotation each time the LED is green and note the direction the
DDU is facing (the LED may turn green once or multiple times).
This is an indication of the signal strength the DDU is receiving
from the cellular phone tower. The DDU should be mounted
facing the direction the DDU was pointed for the longest period of
time the LED was green during its rotation.
9.
For wall mountings it is recommended that various walls of the
structure be tested as suitable locations to position the DDU. For
each location that the DDU is tested and the LED is green, the
display on the bottom of the SCU indicates relative signal strength
the DDU is receiving; mount the DDU in the location that has the
highest indicated signal level.
Figure 3.8:Displayed Signal Strength
10.
Proceed to page # for mounting instructions once the DDU
location has been optimized.
TO BE UPDATED