FresneLED 250 TW
15
- AUTO CONFIGURE in STAND ALONE MODE
(pictures 8.2-8.3-8.4)
The set up of one luminaire (Mode and Options) is
copied on all the other chain connected luminaires
with the modes described in the previous chapter.
Check the options setup on the starting luminaire:
Master, Slave, Silent Mode.
If the
starting
luminaire is set up as Master
(Picture 8.2)
•
↑
and
↓
to select FREE ZOOM or ZOOM FROM
MASTER (*)
(*) Since the zoom function is not implemented it
will be possible to choose indifferently one of the
two modes
•
ENTER
to confirm (or BACK or EXIT to go back to
the main screen without making any changes)
If the starting luminaire is configured as Slave or
neither Master nor Slave (pictures 8.3-8.4):
• Only MASTER OFF will appear
•
ENTER
to confirm (or BACK or EXIT to go back to
the main menu without making any changes)
After having kept the ENTER button pressed AUTO
PATCHING will appear .... Wait until all the FresneLED
are auto-configured then press
DONE
Menu:
ADVANCED (picture 9.4)
■
COLOR TEST
■
FAN TEST
■
FACTORY SETTING
•
↑
and
↓
to select the function
•
ENTER
to confirm
•
BACK
to go back to the previous menu
•
EXIT
to exit the menu and go back to the main menu.