FresneLED 250 TW
10
ELECTRICAL CONNECTIONS
Your luminaire has been designed for a supply voltage
from 100 to 240V, 50/60 Hz.
Before and during the installation, follow the
instructions below:
• Always check the earth wiring for the line being used.
• Ensure the voltage for the unit is the same as the one
used for the supply.
• The product is designed for indoor use (IP 20) :
consequently it has to be protected from dampness
and rain, if used in different conditions
• The luminaire CANNOT be connected to a dimmer.
The following lockable connectors are located on the
rear of the luminaire:
• for power supply:
- 1 Powercon BLUE (for power IN)
• for control:
- 1 x 5 pole XLR male connector for DMX 512 signal
input (DMX IN) or serial (Master/Slave)
- 1 x 5 pole XLR female connector for DMX 512 signal
transmission to the following luminaire (DMX THRU/
OUT) or serial (Master/Slave)
FOCUSING
By using the side handle
②
it is possible to loosen the
luminaire and thus change its inclination. In the same
way, the luminaire can be rotated with respect to its
vertical axis by rotating on its hooking hinge.
MAINTENANCE
Service the luminaire at least once a year to check the
integrity of the electrical and mechanical parts and for
any possible software update.
On this purpose, only contact qualified dealers, to
guarantee correct and full servicing
RECYCLING
The product must be recycled or disposed of,
according to Directive 2002/96/CE
GENERAL DESCRIPTION
DESCRIPTION OF THE LUMINAIRE
Referring to drawings on page 2 (Picture 1)
①
Suspension bracket
②
Luminaire tilt adjustment handle
③
Accessories cover and locking spring
④
Accessories guides
⑤
Zoom adjustment knob
⑥
DMX THRU / OUT
⑦
DMX IN
⑧
Display
⑨
Display buttons
⑩
Power supply IN (Powercon connector)
GENERAL INFORMATION
The luminaire you have bought satisfies directives
73/23/EEC as it complies with standards EN 60598-1
and EN 60598-2-17. The label located on the side of the
luminaire contains the following information:
• Model
• Supply voltage in V
• Power of the luminaire in W
• IP protection index
• Maximum allowed ambient temperature in °C
INSTALLATION
• The luminaire is intended for professional use only.
• Please note carefully the notes written on the labels
of the luminaire.
• The luminaire can be used both suspended and
mounted on a stand.
WARNING: The luminaire must always be
earthed
