Spot-on MMR-W300R, Инструкция по эксплуатации

Страница: 16 / 32

16
Blade tilt mode accuracy setting
Fine: ±0.5°
Standard: ±1.5°
Coarse: ±2.5°
Blade tilt (bulldozer) mode
When the receiver is mounted onto a blade of a bull
dozer or grader it can display the level position of the
blade.
• To activate the blade tilt mode display, press the
blade tilt mode button .
• As default, the detection mode is set to ‘fine’. To
change the selected mode, press and hold the
power button and the excavator mode button to
cycle between each mode (‘coarse’, ‘standard’ or
‘fine’). The LED indicators will light up to display
the detection mode setting (see illustration, right).
Release the buttons when the desired mode is
selected.
• The centre LED indicators will illuminate green to
indicate the level position (see illustration, page 16).
• The red LED indicators will illuminate to indicate
the tilted position (see illustration page 16).
• The in-cab display will duplicate the reading on the
receiver (to set-up the in-cab display, see page 8).
USING YOUR RECEIVER (continued)