Spot-on MMR-W300R, Инструкция по эксплуатации

Страница: 14 / 32

14
Laser line not detected
Standard Detection
• Ensure that the desired detection mode setting is
selected (see page 11).
• When the receiver sensor panel is in the path of
the beam, the LED light indicators will flash (see
illustration, page 15). The LED lights that illuminate
may vary depending on the detection mode
selected (coarse, standard or fine).
• The LED indicators will flash green to indicate
centre alignment (see illustration, page 15).
• If the receiver cannot detect the beam, the red
LED lights will flash slowly in the direction of the
last detection point (see illustration, right).
• The in-cab display will duplicate the reading on the
receiver (to connect the in-cab display, see page
12) The in-cab display will not show any reading if
the laser line is not detected.
The MMR-W300R is compatible with most
red beam rotary lasers.
i
USING YOUR RECEIVER (continued)