FCC ID :DY7RT8059
13
(12) Localizer
1. Enter the desired Localizer frequency, 110.700 MHz for example.
2. The CDI needle will now indicate the deviation from the localizer. Each division is
deviating of every one time that starts from the centerline. This gives the display
the ability to show a five-degree deviation to the right or to the left.
3. The display will appear as follows in the localizer mode.
To exit the localizer mode enter a COMM or VOR frequency.
(13) Localizer and Glide Path
1. The angle of approach degree to the glide slope is matched when the Glide Pass
signal is received and it is displayed in the frequency of Glide Pass that becomes
a pair as the service frequency of the localizer under the reception.
2.
The display will appear as follows in the localizer and Glide Pass mode.
