FCC ID :DY7RT8059
9
(5) Manual Frequency Search (COMM & NAV)
1. Press the UP or DWN key to change the frequency manually by 8.33kHz
(COMM.) or 50kHz (NAV) steps.
(6) Frequency Memory
1. Enter the desired frequency either by direct selection or using the search mode.
2. Press the MEM key. The screen will display the first open memory channel (00 to
19) or 00 if all 20 channels are filled.
3. Press UP or DWN to scroll through the memory channels and select the desired
channel (00 to 19) to store the frequency. If a memory channel already has
frequency stored in it, that frequency will also be displayed with the channel
number on the memory channel list of the screen.
4. Press MEM to store the frequency in the select memory channel.
Press the CLR key at any time prior to step 4 to return to the unit to its previous
mode without saving the frequency.
Note:
If you select a channel that already contains a frequency, that frequency will be
erased when the new frequency is stored.
(7) Memory Recall
1. Press the RCL key. The unit will display and receive the frequency in the first
memory channel with a saved frequency.
2. Press UP or DWN to scroll through the saved channel and select the desired
frequency, or
3. Enter the desired memory channel such as 00 or 01.
Press the CLR key at any time to exit the memory recall function.
Note:
You cannot recall a vacant memory channel.
When you exit the memory recall function by pressing CLR the unit will remain
on the last frequency that was being received.
