be displayed on the top line of the screen while your selected
frequency remains on the bottom line.
Once the desired memory channel is selected on the top line of the
screen, press the Memory Key and the frequency will be stored.
Remember, if a channel was selected that was already storing a
frequency, the old frequency will be erased when your selected
frequency is stored.
You may exit the memory function by pressing the Clear Key any
time prior to storing the frequency (pressing the Memory Key the
second time).
Memory Recall
To recall a frequency stored in a memory channel, press the Recall
Key. The memory channel number and the corresponding frequency
of the first memory channel that is being used will be displayed. This
frequency immediately becomes the active frequency and is received
by the SP-200.
In this example, memory channel 01 is listed first, so we know that no
frequency is currently being stored in memory channel 00.
At this point you may select any stored memory channel by either
pressing the Up or Down Key to scroll through the stored frequencies
or by entering the memory channel number by using the Numeric
15
122.975
04 118.700
122.975
01
SP-200 BOOKLET 9/28/04 5:46 PM Page 19
