SEPTEMBER 21, 2010
6
902-958 DUAL LEG PRESS STATION
INSTALLATION INSTRUCTION
Welds
!
Inspect all welds for cracks. If a
crack is found block access to the
playground and contact your
distributor for replacement parts
immediately.
Hardware
!
Inspect for loose or missing
hardware. Tighten all loose
hardware and replace all missing
hardware. Block off access to
equipment if necessary.
Plastic Components
!
Inspect for any sharp edges or
deformities. Minor deformities
and sharp edges can be repaired
using a utility knife. Block off
access until repairs are made.
Contact distributor for
replacement parts.
Finish
!
Inspect all metal components for
coating damage. If powder coating
needs to be repaired sand surface
and mask off area. Coat with
primer and once the primer has
dried paint with color matching
touch up paint. Contact distributor
of color matching paint. Contact
Distributor for Thermoplastic
repair kit.
Footings
!
Inspect all footings to ensure
equipment is secure. You must block
access to prevent access until repair is
made.
Replacement Parts
!
Reference the parts list on page 2 of
the instruction set for this component
to identify the part/s correctly.
!
Contact your distributor to order parts.
MAINTENANCE
!
THIS DOCUMENT WILL ACT AS
YOUR ORIGINAL DOCUMENT
AND COPIES SHALL BE MADE
FOR USE DURING THE ACTUAL
INSPECTIONS
!
MAINTAIN A FILE WITH COPIES
OF ALL INSPECTIONS AND
MAINTENANCE RECORDS
ALONG WITH THE
INSTRUCTIONS
