background image

  

 

May 21, 2020  

 

 

382-408 HD WHEELCHAIR SWING PLATFORM 

INSTALLATION INSTRUCTION 

INSTALLATION STEPS CONTIUDE 

__6) 

Attaching Front and Back Restrain Chain: 

To do this all 

you have to do is use the swivel snaps and hooks it to the D-

Shackle. The small restrain chain goes in back and the long for 

the front. 
__7) Inspect

 the components:

 for sharp edges and if necessary, 

file them down and apply touch up paint. 
 

OPERATIONAL INSTRUCTIONS: 

__1) Two people must be present to get the platform into an 

operational position. 
__2) One person must hold the platform in position while the 

other person is placing the wheelchair on the platform. 
__3) The long restraining chain must be unsnapped of removed 

before placing the wheelchair onto the platform. 
__4) Once the chain is unsnapped or removed, and then the front 

platform/chain assembly must be unsnapped from the chain 

assembly and pulled down. 
__5) Once the front platform chain assembly is pulled down, the 

wheelchair should be placed or rolled onto the platform (handles 

facing long platform/chain assembly). 

Note: Make sure the 

wheelchair is in a locked position. 

Only use the long entry 

ramp for entry and exit. 
 

 

 

 

Содержание 381-404H
































Отзывы: