background image

53

MAINTENANCE  

Task List

Like cars, fitness products require maintenance. Regular maintenance ex-

tends product life, and failure to maintain products can void the manufac-

turer’s warranty. Copy the maintenance log sheet, and record maintenance 

work for each fitness product.

Daily tasks

1. Use a clean, lint-free towel, dampened with a mixture of Simple Green® 

    all-purpose cleaner and water, to thoroughly clean the product exterior.

2. Inspect all screws. Secure if necessary.

3. Run a treadmill test everyday to make sure it is operating properly.

Monthly tasks

1. Inspect walk belt alignment. Align the walk belt if necessary. Inspect for 

    wear. Lubricate if needed.

Quarterly

1. Inspect the walk deck for wear. Flip the walk deck if necessary.

2. Inspect the walk belt guides for normal rotation.

3. Inspect the front roller for normal rotation.

4. Inspect the rear roller for normal rotation.

5. Remove dust and debris from the motor compartment.

yearly

1. Replace the drive belt once every three years.

2. Replace the lubricant bottle every 40,000km/25,000mile. 

Caution

 

Please follow standard safety precautions when servicing on this product.

 

Electronic components can carry an electrical charge even after the     

 

● product has been turned off. For safety, turn off unit power. Wait five        

  minutes to allow capacitors to discharge. Then disconnect the power      

    cord from the wall socket (if applicable.) Only after such steps have  

 

  been completed should covers be removed and electronic components   

 accessed.

 

Do NOT use cleaners with alcohol, ammonia, or other damaging   

 

  chemicals. The use of such chemicals can damage the product and  

 

  void the warranty. Never spray or pour any liquid directly onto the  

 

  product. Doing so can damage electronic components and void the  

 

 warranty.

 

This product has moving parts that can be hazardous. Exercise caution   

  when maintaining, operating, or moving this product.

Содержание T675
























































Отзывы: