SportsArt Fitness G572R, Руководство по ремонту

Страница: 41 / 45

Inspect and Measure
Part: Alternator
Item: Alternator inspection
Procedure: 1.Set the voltmeter to the VAC setting. Pedal the bike. Place probes on drive board CON9 wires as follows to see AC voltage
values: green-white, white-black, green-black. The faster you pedal, the higher the voltage.
2. Set the voltmeter to the VDC setting. Pedal the bike. Place probes on drive board CON6 wires: white-black. The faster you pedal,
the higher the voltage. CON6 is where alternator AC voltage is rectified to DC voltage and sent to the boost converter.
2. If alternator voltage is not detected, the issue is on the alternator circuit. Please inspect the cable connections, alternator, and fuse.
CON9 alternator inputvoltage
CON6 alternator output voltage
Alternator
connection
Alternator fuse F1
6.3A
CON9 alternator input
voltage
CON6 alternator
output voltage