40
OPERATION
User Parameter Setting
Hold the <RESISTANCE - > for 3 seconds to enter the user parameter
setting procedures; press the <STOP> key at any time to return to the start
screen.
Please refer to the following setting procedures:
(1) Metric System / Imperial Units Setting
The window will display KM or MILE, press <LENGTH ▲/▼> or
<RESI/- > to select the metric system or the imperial units, then
press <GO/ENTER> key to confirm your setting and go to the next step.
(2) Display the Program Version
The window will show the version of each program, press <LENGTH ▲/▼>
or <RESI/- > to view each program version, then press
<GO/ENTER> and go to the next step.
Program Version Items:
(a) CTL SA_6 - xx
à
The program version of the control board.
(b) DRV E875_SG - xx
à
The program version of the drive board.
(c) SA WELL+ x.x.x
à
The program version of the SA WELL+ adapter.
(This function is only available if you purchase SA WELL+.)
(3) Display the Mileage
The window will show the message of DIST- xxxxxx KM or DIST- xxxxxx
MILE, press <GO/ENTER > and go to the next step.
(4) Display the Total Time
The window will show the message of TIME- xxxxxx HOURS, press <GO/
ENTER > and go to the next step.
(5) Product Serial Number
The Window will show the message of “S/N xxxxxxxx” (as shown below),
press <GO/ENTER > and go to the next step.
※
The number “1234567” in the picture represents the machine serial
number.
