ACE ATTACk
™
TENNIS MAChINE
Sports Attack, LLC.
•
800-717-4251
•
www.sportsattack.com
2
Ac
e Att
ack™ Saf
ety Ins
tructions
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
Use a 115 volt single phase 3-wire grounded
power source.
Up to 200 ft. from power source, use a
minimum #14/3 grounded 3-wire extension
cord.
Over 200 ft. from power source, consult a
licensed electrician for required power cord size.
OPERATING SAFETY
1. Never reach hands into throwing wheel area.
2. Always use the Ace Attack with throwing wheel shields in place.
3. Use the Ace Attack only under adult supervision.
4. Use the Ace Attack only for their intended purpose.
5. Do not operate the Ace Attack with a damaged cord or plug, if the machine
malfunctions or has been damaged.
6. Check machine before turning “ON” to make sure there are no foreign object
in feed chute.
7. If ball becomes lodged and stops motor, immediately turn machine off before
dislodging.
8. to dislodge ball from throwing wheel, unplug machine and push ball through
chute. Do not reach hand into feed chute with the machine running.
9. Only one person at a time should operate the Ace Attack.
10. Be sure chain is locked when standing on platform.
11. Do not allow anyone to walk directly in front of the machine. keep face and
hands away from ball exit.
12. A ball should always be test thrown from the Ace Attack before beginning any
drill. throw several balls to verify end location.
13. keep hands, hair and loose clothing away from moving parts.
14. Do not use near water or use damp or wet balls.
WARNING
PERSONAL INJURY
hAZARD
Carefully read all instructions
in this manual, and all labels
and warnings on the Ace
Attack before using either of
the machines.
Use machine only under adult
supervision. Failure to operate
Ace Attack as described in this
manual can result in severe
personal injury or death.
ELECTRICAL ShOCk
hAZARD
Ace Attack must be connected
to a properly grounded electrical
receptacle.
•
Do not operate on wet ground.
CAUTION
PERSONAL INJURY
hAZARD
keep hands away from
throwing wheels anytime the
machine is connected to a
power source.
•
Carefully check Ace Attack for
completeness and condition
before connecting to electrical
power.
EQUIPMENT
ELECTRICAL
DAMAGE
DO NOt plug in or energize the
equipment until all Assembly
and Operation Instructions are
read and followed.