ACE ATTACk
™
TENNIS MAChINE
Sports Attack, LLC.
•
800-717-4251
•
www.sportsattack.com
10
Ac
e Att
ack™ Oper
ation
OPERATION
(cont’d)
OSCILLATION CONTROL
the Ace Attack provides a variety of oscillation selections:
Single Line:
the ball is thrown to the same spot. to set the
repeat mode, position switch in the center.
Two or Three Line:
the ball is thrown to two or three loca-
tions on the court. the ball direction will now alternate
between forehand and backhand or throw to two or three
separate lines for group
instruction. to set the machine for two or three positions,
position the switch to either the middle position for two-
line or the lower
point for three-line, “switch” and select either the two
position or three position option on the adjacent switch
that is immediately left.
Two Line “The Gould” Drill:
Used for simultaneously training
two players, or two lines of players, the ball is thrown to
the
backhand, then forehand, followed by two (2) balls to the
center
of the oscillation width.
Width Control:
this dial controls the distance between shot
locations. the range or distance between shots is infinite
and easily dialed. the width increases as you turn the dial
clockwise.
10 = widest
1 = narrowest
Interval Control:
this dial allows you to change the frequency
or time between shots. Depth of shot, range of shots,
type of shot and method of instruction all require differ-
ent intervals between shots. the interval increases as you
turn the dial clockwise.
10 = approximate 10 second interval
1 = approximate 1 second interval
Two Line
Three Line
Gould Drill
Single Line
CAUTION
PERSONAL INJURY
hAZARD
Failure to use the special tool
provided to install the casters
could result in personal injury.
EQUIPMENT DAMAGE
Failure to use the special tool
provided to install the casters
could result in equipment
damage.
EQUIPMENT
ELECTRICAL
DAMAGE
DO NOt plug in or energize the
equipment until all Assembly
and Operation Instructions are
read and followed.